Motor Control Electric Flanged Gate Valve

JOEPAI High Quality Motor Control Electric Flanged Gate Valve made in China is responsive, safe, and reliable. Many factories with high control requirements have set up compressed air stations specifically for pneumatic instrument control components. Electric devices require electricity and can control their flow rate.

Product Standards:

Design standard conform to: MSS SP-67, API609, EN593

Connection flange conform to: DIN PN10/16/25, ANSI B16.1, BS4504, ISO PN10/16,

JIS B2212/2213, BS 10 Table D, BS 10 Table E

Top flange conform to: ISO 5211

Face to face conform to: API609, ISO5752 series 20, BS5155

Test standard conform to: API598

Design Features:

1. Equipment used in cutting off medium in pipeline.

2. Suitable for hand wheel, gear operators or electric actuators.

3.End: Flanged RF/ RTJ/ FM/ FF , Butt-welding(BW).

Performance:

Nominal Diameter: DN40-DN1200

Nominal Pressure PN (MPa):1.0, 1.6, 2.0, 2.5

Testing pressure (water) PS (MPa)

Body seat: 1.5 times rated pressure

Seat test: 1.1 times rated pressure

Product Purpose

It is an AI controlled analog quantity used for regulating the flow rate of media in liquid, gas, and wind system pipelines. Electric valves can also be used for two position switch control in the control of large valves and air systems.

There can be AI feedback signals, which can be controlled by DO or AO, and are commonly seen in large pipelines and air valves.

Switch form:

The driving of electric valves is usually done by motors, and the opening or closing action requires a certain amount of time for analog measurement, which can be adjusted.

Main Material:

Body Material: Carbon Steel A216 WCB/A105 (GS-C25/ GP240GH/ 1.0619/ P285NH),, WCC, low Carbon Steel LCB, LCC, Alloy St A217 WC6, WC9, C5, C12, Stainless steel A351 CF8, CF8M, CF3, CF3M, CF8C, Duplex steel A890 GR.4A GR.5A,Etc.

Trim Material: 13%Cr,SS304,SS316, SS304L, SS316L, F11, F22 Etc

Type: Rising Stem, BB, FB, OS&Y