Stainless Steel Ansi Flanged globe valve with Handwheel
The JOEPAI High Quality Stainless Steel Ansi Flanged globe valve with Handwheel features a rising stem design, bolted valve cover, and flange end. It is made of high-quality ASTM A216 WCB carbon steel and still has good mechanical strength, corrosion resistance, and long-term durability under high pressure and high temperature conditions.
JOEPAI High Quality Stainless Steel Ansi Flanged globe valve with Handwheel, as one of the most important cut-off valves, plays an important role in the aerospace industry. As an important component of aerospace equipment, globe valves achieve functions such as medium transportation, shut-off, and regulation. Their sealing performance directly affects the safe and reliable operation of aerospace equipment. Studying the influencing factors and laws of the sealing characteristics of typical globe valves has guiding significance for the structural design of valve sealing pairs, thereby improving the sealing performance and reliability of valves.
A351 CF8 Flanged globe valve with Handwheel Feature:
(1) Globe valves have a simpler structure than gate valves and are easier to manufacture and maintain.
(2) The sealing surface is not easily worn or scratched, with good sealing performance. There is no relative sliding between the valve disc and the valve body sealing surface during opening and closing, so the wear and scratches are not severe, the sealing performance is good, and the service life is long.
(3) When opening and closing, the valve disc stroke is small, so the height of the globe valve is smaller than that of the gate valve, but the structural length is longer than that of the gate valve.
(4) The opening and closing torque is large, the opening and closing process is laborious, and the opening and closing time is relatively long.
(5) The fluid resistance is high due to the tortuous medium channels inside the valve body, resulting in high fluid resistance and high power consumption.
(6) When the nominal pressure PN of the medium flow direction is ≤ 16MPa, it is generally used to flow downstream, and the medium flows upward from below the valve disc; When the nominal pressure PN is ≥ 20MPa, reverse flow is generally used, and the medium flows downwards from the valve disc to increase the sealing energy. When in use, the medium of the shut-off valve can only flow in one direction and cannot change the flow direction.
(7) The valve disc is often eroded when fully open.
The axis of the stem of the globe valve is perpendicular to the sealing surface of the valve seat. The valve stem has a relatively short opening or closing stroke and a very reliable cutting action, making it suitable for use as a medium for cutting, regulating, and throttling.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy